Learn how to successfully apply epoxy coatings for garage floors. A complete DIY guide that includes tips for installing epoxy, proper floor preparation, and more. Epoxy floors are a thermosetting resin that is applied as a coating to concrete. It is created when a part of colored or transparent epoxy resin is mixed with a part of polyamine hardener.
And since the garage has become more than just a place to park your car, the benefits of epoxy for garage floors have made it one of the most popular garage flooring options today. In addition, latex repair products shrink as they age and can create a depression under the floor covering that can highlight the repair. For greater protection against stains, dirt and abrasion, many contractors recommend applying good commercial-grade floor wax designed for concrete floors on top of the sealant. Not only does it protect your garage floor, but it can also instantly transform your boring or ugly concrete into a professional-looking floor with beauty and functionality.
If the garage floor is much wider than it is deep, for example, work from side to side rather than front to back. Learning how to apply epoxy to a garage floor isn't difficult once you understand the finer points of the application process and all your questions are answered. Cured concrete continues to release moisture and will cause the floor covering to delaminate if installed too soon. I am thinking of coating my garage floor with an epoxy primer, an epoxy base with full coverage flakes and then one or two layers of transparent polyaspartic.
You should also prevent dust or leaves from entering under the garage door and also entering the coating. Before buying any coating, the first thing to do is to inspect the garage floor to ensure that the concrete accepts a floor covering. One of the strongest and most durable finishes that can be applied to a garage floor today is an epoxy coating. While the second coat is still wet (and still applying to small areas), spread the colored flakes on the floor.
The best way to do this is to close the garage door a few inches from the floor once done. When buying the floor covering of your choice, it's very important to ensure that you have enough to cover the entire garage floor. Use a cheap plastic protective cloth and tape it to the garage door, the floor and the edges of the garage opening to form a good seal.